|Amsoil Dealer of Salt Lake City Utah
Dealer Ray Mueller – 801-569-2934 (Full Supply)
We also include Bountiful, Farmington, Holliday, Kearns, North Salt Lake, Taylorsville, West Bountiful, West Valley City, Woods Cross in our service area and so on and so fourth.
If you can’t make it into our location our drop shipping rates are excellent. Only .38 cents per pound when you order 40 pounds of product (typical order). A case of oil is 25 pounds so in our higher rate but still only $11.50 to ship at 47 cents/lb.
We can arrange pick-up but please call me ahead as a courtesy. Save a LOT of money on Amsoil just by calling. Amsoil is also a great addition for Motorcycle parts houses.
Dealer Ray & Patricia Mueller – 801-569-2934
If a dealer cannot be reached call central ordering 800-579-0580
SEE New Dealer Info at Bottom of page!
Serving the growing Salt Lake City Metro area and the State of Utah, we are the most resourceful AMSOIL Dealer in this part of the country not to mention part of the fastest growing AMSOIL dealer group in Canada & the USA. Look through the main site and request your catalog or just email me for your order. Being there are few dependable AMSOIL dealers in the area, save our number as you can depend on us. We should have what you need in stock but if not our warehouse in Portland, OR will have it drop-shipped right to your door in a couple days or here at the warehouse should it be something we don’t move often.
It’s always best to sign-up as a preferred customer if you own several vehicles or want the best deal all the time. We will soon post any shops where you can buy AMSOIL from but for now I can ship anything to you from our distribution center or you may pick up here. Lately, most people are joining as a Preferred Customer. Just print out the P.C. Form and fill out the information in the Preferred Customer section.
Call me to order & arrange pick-up:
Ray & Patricia 801-569-2934
My wife and I brought the 1998 Nissan Maxima in the year 2000 from Hertz used cars. The car is equipped with 3.0 V6 engine. A few years later a friend of mine at work was telling me about Amsoil. I decided to do some investigating on my own to verify AMSOIL’s claims.
I discovered that there were a number of automobile companies that would void their warranty if synthetic oils were not used. In 2004 I put Amsoil synthetic engine oil in the vehicle. The first noticeable improvement was the car accelerated better than before. I also experienced an increase in gas mileage of 30 miles each tankful. The winters in Utah can get very cold sometimes below zero. One of the benefits of using Amsoil is the engine is a lot easier to start in the cold weather. I decided to put in the transmission fluid the following year. The transmission shifted smoother even in cold weather.
In the year 2010 I changed the transmission fluid again. The color was a slightly darker red than the new transmission oil. The filter was very clean. The transmission oil held up well after 73,000 miles and 5 years of usage. Today the car has over 185,000 miles on it and it runs extremely smooth.
AMSOIL Salt Lake City, UT proudly serving the Western US – Synthetic-oil-sales of Utah is a nationwide AMSOIL Synthetic Lubricants dealer.
AMSOIL – used by the greatest teams of racing, Other brands may fancy up the skin with their logo but that is not what’s used under the hood. Experienced teams in the public eye know AMSOIL results in greater dependability.
AMSOIL has a documented history of innovation and leadership.
- First to develop an API-rated 100 percent synthetic motor oil.
- First to introduce the concept of “extended drain intervals” with a recommended 25,000-mile/1-year drain interval.
- First U.S. company to utilize the NOACK volatility test as a standard of performance excellence.
- First to produce synthetic motor oils for diesel engines, racing engines, turbo and marine engines.
- First to introduce synthetic oils that legitimately contribute to improving fuel efficiency.
- First to manufacture synthetic gear lube for automotive use.
- First to manufacture a 100:1 pre-mix synthetic 2-cycle oil.
- First to manufacture a synthetic automatic transmission fluid for automotive use.
When using AMSOIL, be sure to check out the By-Pass filtration systems as By-Pass systems here.
Call me for the best price.
Many would find it difficult to believe but this system typically allows oil change intervals to exceed 100,000 miles or 3 to 4 years when using AMSOIL and a good oil analysis system such Oil Analyzers.
We have several different kits for all vehicles, both diesel and gasoline.
- Increase Oil Life
- Increased Filtration Capacity & Life – Cleans up a deposit prone engine
- Protects new cars from wear or soot build-up in diesels
- increases oil capacity which allows additives to last longer
- Helps cool oil further reducing wear
- Decrease disposal costs and reduces dependence on foreign oil.
- Mounts anywhere you want it (the BMK-21 is the single and easiest to work with in more applications)
- Engine efficiency increased thus retain best mileage.
With AMSOIL in gasoline engines you simply reach 25,000 miles or one year before draining your oil. All products are produced in the USA.
Made with premium-grade full synthetic media. Ea Oil Filters feature advanced full synthetic nanofiber technology, making them the highest efficiency filters that are available for the auto/light truck market. AMSOIL EaO Filters are guaranteed for 25,000 miles or one year, whichever comes first, when used in conjunction with AMSOIL synthetic motor oil in normal service. In severe service, change oil and filter at recommended severe service oil drain interval. The filters are manufactured by Donaldson using their nano-fiber for AMSOIL specifications. The only 15 micron FULL FLOW oil filter available for cars and light trucks.
Also don’t forget about our best selling product as of late. The Motorcycle line. One important aspect of this line listed below:
Improved Transmission Protection
Viscosity is the most important characteristic of a lubricant. Motorcycle gears create a shearing effect that causes permanent oil viscosity loss. This thinning effect reduces the oil’s ability to prevent metal-to-metal contact and wear. The stability and natural operating temperature ranges of the premium synthetic base stocks used to formulate AMSOIL Synthetic Motorcycle Oils eliminate shear and reduce wear. AMSOIL Synthetic Motorcycle Oils exhibit absolute shear stability as measured by the Kurt Orbon shear stability test.
“Utah temp extremes can ruin an engine (in storage), you knew that – but our customers who use AMSOIL in their bikes all say the same thing. Surprisingly lower temperatures in both air and water cooled engines. Even more we hear comments on shifting and gear mesh improvements. AMSOIL’s new Motorcycle oils last three times longer or up to one year now thanks to added rust protection. No other product can offer this!”
Like motor oil additives, drivetrain fluid additives improve the protection and performance capabilities of the base oil. Many of the challenges faced by drivetrain
fluids are met by the additives.
• Extreme-pressure and anti-wear agents minimize
component wear in boundary lubrication situations.
• Pour point depressants improve low-temperature
• Rust and corrosion inhibitors protect internal
• Oxidation inhibitors reduce the deteriorating effects
of heat, increasing the lubricant’s service life.
• Viscosity index improvers allow the lubricant to
operate over a broader temperature range.
• Anti-foam agents reduce the harmful effects of air
trapped in a lubricant.
• Friction modifiers reduce friction.
AMSOIL Severe Gear® Synthetic Extreme Pressure (EP) Gear Lubes are specifically engineered for maximum performance in severe-duty applications.
Featuring an exclusive blend of high viscosity, shearstable synthetic base oils and an extra treatment of high-performance additives, Severe Gear maintains its viscosity for long-lasting protection against metal-to-metal contact. The proprietary AMSOIL additives form an iron-sulfide barrier coating on gear surfaces, providing the ultimate line of defense against wear, pitting and scoring.
AMSOIL Synthetic Universal Automatic Transmission Fluid (ATF) is engineered to exceed the performance requirements of domestic and foreign automatic transmission
fluids, offering smooth shifting, long transmission life and excellent lubricating protection and performance in temperature extremes.
AMSOIL Synthetic Fuel Efficient Automatic Transmission Fluid (ATL) is engineered to exceed the requirements of GM, Ford and Toyota where low viscosity oil is required, providing outstanding protection and performance over extended drain intervals,
even in severe operating conditions.
In Ontario the #1 source of damage in motorcycles is internal rust and corrosion in the transmission. With AMSOIL Advanced Synthetic Motorcycle Oils you are safeguarded in storage. Again you need to review the AMSOIL Motorcycle Oil Whitepaper Study which was just updated June of 2009.
Dont forget to check out our Archived Motorcycle Oil Whitepaper:
At the time of its original printing in December 2005, the A Study of Motorcycle Oils white paper represented the most comprehensive study of motorcycle oils ever published.
The document served to educate hundreds of thousands of readers on the complex dynamic of motorcycle oil and motorcycle operation. The paper revealed, through an exhaustive series of relevant industry tests, that the motorcycle oils available to consumers varied greatly in quality and in their ability to perform the functions of motorcycle lubrication.
This second edition printing maintains the same scientific approach and includes the same testing protocol.
Additional oils were tested, and some of the original oils tested differently than they had initially, indicating formulation changes. It should be noted that while some oils tested more poorly than they initially had, others showed improvement. Whether or not this improvement can be credited to the data revealed in the original publication remains a matter of speculation. In any case, as motorcycle oils continue to improve, consumers will benefit.
The high temperatures and tight tolerances common to motorcycle applications also affect viscosity. The High Temperature/High Shear (HTHS) Test (ASTM D-4683) measures a lubricant’s viscosity under severe high temperature and shear conditions. The more resistant an oil is to high temperature viscosity loss, the better it protects, and even a HTHS difference of 0.1 cP makes a significant difference.
AMSOIL Synthetic Motorcycle Oils exhibit higher HTHS viscosities than competing conventional and synthetic motorcycle oils. As seen in the graphs, AMSOIL Synthetic 20W-50 and 10W-40 Motorcycle Oils displayed the highest High Temperature/High Shear viscosities in their respective test groups, providing motorcycle engines and transmissions operating in the harshest conditions with superior protection against wear and viscosity loss and eliminating the need for separate gear case oils as recommended by some competitors. Synthetic 10W-40 may also be used in two-cycle transmissions.
AMSOIL Synthetic 20W-50 Motorcycle Oil (MCV) is a premium oil designed for those who demand the absolute best lubrication for their motorcycles. AMSOIL MCV is the result of extensive research, and it is specially formulated to excel in all areas unique to motorcycles, including high temperatures of air-cooled engines such as Harley Davidson® V-Twin, wet clutch lubrication, extreme pressure regions of gears and chains and rust common to short trips and storage.
SLC – 801-532-6014 After 6PM
Before 6PM call 605-361-4075
Our new 0W-20 Motor Oil in the crankcase of a modern vehicle guarantees it will deliver the best fuel economy it is capable of. With a very low volatility rate, oil consumption and emissions are greatly reduced. This is the ‘oil of the future’ here today thanks to AMSOIL. But it won’t be the last new oil we make. Stay tuned!
Also introduced in this issue is our newly reformulated PI Performance Improver Gasoline Additive. It is the most effective gasoline additive available today and makes gasoline engines perform the way they were designed to. PI cleans and keeps clean fuel injectors, combustion chambers, valves, and pistons.
Every vehicle tested using this new fuel additive experienced improved fuel economy (up to 5.7%). It also acts as an “emissions passer” and is ideal for use before emissions inspections. It’s also more convenient to use. Just add one bottle of the new PI to 20 gallons of gasoline every 4,000 miles or 100 hours . You can’t find a more effective or easier way to get the best performance from a vehicle!
People who know me know I tell it like it is. Sometimes I may be a little too blunt, but you won’t misunderstand me. So when you’re the best, I think it’s OK to tell the world about it. AMSOIL products are the best, period, and you can quote me!
We Need Dealers in Salt Lake!! Our regional dealers offers the best support and success strategies in the US. We are in the top 10 AMSOIL dealer group based out of Sioux Falls, SD. Call now at 605-361-4075 for AMSOIL Dealer info and we will help you get set up with Chilton in SLC – become part of something big!
Why should you join our group? We are part of one of the most successful marketing dealers who specializes in internet search engine trends. This alone is a full time job which has brought us some of the top and most frequent leads in the country. We do much of the work for you. Let us help you get on the web fast in your local area. We also re-distribute significant leads to our group. The dealers who are easy to locate are the ones who are experiencing double digit growth. You can say we have the smallest group with the most volume. We’ve ranked in the top 10 in personal sales for AMSOIL since 2005.
Demand for Amsoil has recently increased. More products are stocked in Utah as sales here are higher than most places within the US. We’re top in the country due to auto enthusiasts. We need dealers in the greater Salt Lake area and there is a great need for AMSOIL dealers all over. Customer sales especially with ATVs, RVs, motorcycles and diesel engine owners are top. We are getting the word out! There are not enough dealers here in town.
Utah winters can be rough on cars and good on repair shops – but not a problem with AMSOIL. For winter, mountain areas and cold season, be utterly amazed when you turn the key and your engine responds as if it has been running for 15 minutes.
Join us as a dealer! You get excellent support from myself, our top ranking team in the whole AMSOIL organization and free leads from AMSOIL too. We share leads with you. Any dealers interested will have a better than average opportunity to pick up on strong leads and grow their businesses. Ask for a copy of the AMSOIL Magazine or the monthly dealer newsletter to see where we rank. Be sure to check out our Dealer page to get started in our growing group!!
Now Mann European Filters from your Toronto AMSOIL dealer
By associating with MANN+HUMMEL, AMSOIL is able to offer a more complete line of high performance filtration products. MANN+HUMMEL is also the Original Equipment
Manufacturer (OEM) for most makes of European vehicles, and for the 2009 General Motors
Duramax filter. MANN is the world’s largest filter company and is a worldwide leader in auto, light truck, heavy duty, motorcycle, and off road products. They are also OE of many types of under-hood components.
See our Minnesota dealers at AMSOIL Dealer of Minneapolis
AMSOIL Dealer Opportunities in 2019 and beyond provide you with the ultimate home business opportunity with over 45 years of continuous growth to back it up. These products ARE IN DEMAND! We will help you stay on course but you can become totally financially independent if you put in the effort, Call me or one of my dealers and we would love to discuss it with you.
The big thing now is getting AMSOIL in local stores, independent lube centers and automotive shops. We have a successful method to secure local business not to mention the latest in shelving, display, free installer & retailer locator listings on the corporate site, personalized materials for the shop and free shipping for those who qualify.
AMSOIL is the auto enthusiasts hero! And increases in advertising and regional support teams are there to make it more possible for you to reach your goals as an AMSOIL dealer.
Join us every year for AMSOIL University or try the upcoming online version and get ready to tell the old boss good-bye. We can even help you open your very own Amsoil Retail Store!
AMSOIL’s highest demands are in both the diesel and powersports sector. We urge you to call us and then read more in our Dealer Opportunities section. We may also have a team of dealers close to you so call and we will forward their information.
Industry is pointing consumers our way from every direction:
- AMSOIL is becoming a household name. Customers are expecting to find it locally.
- Vehicle manufacturers are installing synthetic oil into new vehicles on the production line.
- Cars & Trucks made before 1995 need oils with more anti-wear additives and better quality detergents.
- Drivers discovering top quality (real) synthetics do indeed increase fuel mileage.
- New lubricant trends demanded by industry are developed well before the engine and transmission technologies hit the marketplace. This allows AMSOIL to further develop their product even further while the competition arrives late testing their product after the requirement goes live.
- New emission systems demand oils, which can take more heat and leave fewer deposits. Currently diesel engine changes have created problems which demand more stable base stocks. We have them and you save more fuel to boot!
- OEM Automatic Transmission Fluids are limited to light duty use. AMSOIL ATF and Low Viscosity Trans Fluid cuts temperature significantly and delivers more power to the wheels. Our transmission fluids continue to be well ahead of the industry because of AMSOIL’s relationship with suppliers.
- They are demanding better lubrication qualities from the oil to improve fuel economy.
- Commercial vehicles Require synthetics in transmission and drivetrain parts to retain extended warranties. (And better power transfer).
- Environmentally we can not go on disposing of the millions of gallons of oil each year that is the bi-product of 3,000 mile oil change intervals – Imagine if everyone changed their oil at say 7,500 miles instead. The used oil disposal problem would be cut by 50%. Yes 50%, not just 1 or 2% – Now consider the impact of a 25,000 and beyond oil change interval.
- OEM fill and recommended product now from several lines such as Eric Buell Motorcycles.
- AMSOIL is MADE in USA.
As one of the largest and fastest growing groups recognized by AMSOIL, and (we think) the most responsive, we offer the communication and tools you can use. We help the customer find you. Come visit our AMSOIL Store and see how you too can make online ordering obsolete in your area too!
Why should you join our group? We are part of one of the most successful marketing dealers who specializes in finding you customers and putting you on the right track. For me it’s a full time job, and we do what it takes to help people locate you. We re-distribute significant leads to those requesting them. The dealers who are easy to locate, keep some stock and follow-up on leads are the ones who are experiencing double digit growth. Use this dealer Preferred Customer link to join or CALL so we can pair you with a dealer near you.